A quiet office at dusk, a timber desk and a lamp beside full height glass looking out over the Los Angeles city grid and the hills.

Home·Guides·Commercial leases

Commercial rent per square foot in Los Angeles

Turn a quoted rate into the check you will actually write

General education, not legal, tax or financial advice. I am not a licensed real estate agent or broker. My California salesperson license is in progress. For a real lease, use a licensed broker and an attorney.
Direct answer

Commercial rent is quoted in dollars per square foot, and the quote leaves three questions open: is the rate monthly or yearly, is it charged on rentable or usable square feet, and are operating expenses included or extra. Many Los Angeles listings quote a monthly rate where much of the country quotes a yearly one, so ask. Multiply the monthly rate by the rentable square feet for base rent, then add expenses if the lease is net.

Monthly or yearly: SF/MO and SF/YR

For example, $3.00 a foot a month and $36.00 a foot a year are the same rent. Divide a yearly rate by 12 to compare it with a monthly one. Listing sites do not all label the unit the same way, so confirm it before you compare spaces.

Listings shorten the unit. SF/MO, or $/SF/MO, means per square foot per month. SF/YR, or $/SF/YR, means per square foot per year. So $3.00/SF/MO and $36.00/SF/YR describe the same rent, and a flyer that leaves the unit off is the one to ask about.

Rentable and usable square feet

Usable square feet is the space inside your walls. Rentable square feet adds your share of the building's common areas, such as lobbies, corridors and shared restrooms. Rent and operating expenses are usually charged on rentable. The difference, as a percent of usable, is the load factor, also called the add on factor.

Many office buildings are measured under a standard published by BOMA, the Building Owners and Managers Association, and the lease should say which version. Two spaces with the same usable area can carry different rentable areas, and so different rent.

Gross or net

In a gross lease the rate covers base rent and the building's operating expenses. In a net lease, such as a triple net lease, you pay base rent plus your share of property taxes, insurance and common area maintenance. The NNN lease vs gross lease guide has a calculator for comparing the two.

If your business is very small (five or fewer employees, a restaurant under 10, or a nonprofit under 20) and you give the landlord written notice, California Civil Code 1950.9 may limit how building operating costs are billed and let you request the supporting documents, depending on when the lease was signed or renewed. The CAM charges guide covers who qualifies.

How to calculate NNN rent per square foot

Put the base rate and the NNN charges in the same unit, add them, then multiply by the rentable square feet. With the made up numbers below, a base rate of $3.00 a foot a month plus NNN charges of $1.10 a foot a month is $4.10 a foot a month. On 2,000 rentable feet that is $8,200 a month, or $49.20 a foot a year.

The NNN figure is an estimate. The landlord compares it with the actual costs after the year ends and sends a bill or a credit, so ask what the charges ran per foot in each of the last three years.

Questions to ask with any quote

  • Is the rate monthly or yearly?
  • Rentable or usable feet, and what is the load factor?
  • Which expenses are included, and what did they run per foot last year?
  • How does the rent rise each year?
  • Is any area, such as storage or a mezzanine, charged at a different rate?

Worked example: from a quote to a monthly check

Made up numbers for one office space.

ItemExampleMath
Usable square feet1,740
Load factorAbout 15 percent
Rentable square feet2,0001,740 x 1.15, rounded
Quoted rate$36.00 a foot a year, net
Monthly rate$3.00 a foot$36.00 / 12
Base rent$6,000 a month2,000 x $3.00
NNN charges at $1.10 a foot a month$2,200 a month2,000 x $1.10
Monthly check$8,200$6,000 + $2,200

A quick read of $36 a foot on 1,740 usable feet suggests $5,220 a month. The check is $8,200, the number in the video, because rent is charged on rentable feet and the NNN charges come on top. Build the budget from the base rent up.

The short version

Commercial rent per square foot: budget from the base rent up

Read the transcript

Most tenants sign on base rent. That is only the start.

Say you lease 2,000 square feet at three dollars per foot per month.

NNN adds another dollar ten per month: taxes, insurance, maintenance.

Your real monthly bill is $8,200, not the listing number.

My rule: always build your budget from the base rent up.

Questions

Frequently asked questions

How do I calculate commercial rent per square foot?

Multiply the monthly rate by the rentable square feet. If the rate is yearly, divide it by 12 first. Add your share of expenses if the lease is net.

What is a load factor?

How much bigger the rentable square feet are than the usable, as a percent of usable. A 15 percent load factor means paying rent on 115 square feet for every 100 you occupy.

Is commercial rent quoted monthly or yearly in Los Angeles?

Often monthly, but not always. Ask, because a yearly rate read as a monthly one is off by a factor of 12.

What does SF/YR mean in a lease listing?

Per square foot per year. $36.00/SF/YR is the same rent as $3.00/SF/MO, which is per square foot per month.

How do I calculate NNN rent per square foot?

Add the base rate and the NNN charges in the same unit, then multiply by the rentable square feet. A $3.00 base rate plus $1.10 in NNN charges is $4.10 a foot a month.

Why is my rentable square footage bigger than my space?

It includes your share of the common areas, such as lobbies and corridors, measured under the standard the lease names.

Keep reading

More on commercial leases

The guides page lists everything I have written on commercial leases. New guides go up as the videos do, on the accounts linked below.